LOMAX Stance vs BAKFlip MX4

The Lomax Stance is admired for its sturdy look and is available in three premium finishes: Black Urethane, Diamond Mist, and Carbon Fiber, each offering excellent water resistance. Conversely, the BAKFlip MX4 is preferred for its sleek and low-profile design, and it is compatible with a wide variety of trucks.

LOMAX Stance hard tonneau Cover Black Urethane Finish
LOMAX Stance – Black Urethane Finish

Good Stuff


  • Sleek Jet black look
  • Easy to install
  • Universal compatibility with various truck models
  • 5-year Warranty

LOMAX Stance

  • Available in three finishes, Black Urethane, Black Diamond Mist, and Carbon Fiber
  • WeatherTight EPDM seals
  • Automatic 10-Point Locking
  • RigidLink to hold the cover at 90° Position
  • Rubber feet on panels for a quieter ride.

Bad Stuff


  • Water leakage at both the cabin side and near the tailgate
  • Gets scratched easily
  • Less adhesive stripping

LOMAX Stance

  • Sharp Rail corners
  • Expensive
  • May show some leakage at the tailgate
  • Only 3-year warranty
  • Not secure enough, the latch cord is very close to the tailgate

Let’s have a quick look at the specs.

SpecificationLomax StanceBakflip MX4
Cover TypeHard Tri-FoldHard Folding Cover (contains 3 or 4 segments)
DesignLow-Profile (sits less than 1/2 inch above the truckbed)Standard Profile
LatchingPull Cord LatchPull Cord
Panel CoreAluminumAluminum
Frame MaterialAluminumAluminum
Panel ExteriorSturdy AluminumAircraft Grade Aluminum
Seal MaterialEPDM Rubber SealsEPDM Rubber
FinishMultiple options (Black Urethane, Black diamond mist & Carbon Fiber)Matte Black
InstallationClamp-On No-drill installationBolt-On (no drill)
Weather ResistanceWater-resistant coating, UV-resistant coatingWater-resistant, Corrosion Resistant, UV resistant
SecurityAutomatic ten-point lockingAuto-Locking
Weight Capacity400 lbs (evenly distributed)Up to 400 lbs (evenly distributed)
Cover WeightApprox. 70 lbs70 pounds (standard size)
Bed AccessFull bed access using “RigidLink Locking”Full Bed Access (using prop-rods)
Tailgate SealAutomatic Dual Locking SystemAutomatic Dual action tailgate Lock
Warranty3 years Limited Lifetime Warranty5 years
Table of specs LOMAX Stance vs BAKFlip MX4

Design and Build Quality

Alright, let’s have a look at the design of the LOMAX Stance Tonneau Cover. It has got a dual-side pull cable thing, so you can flip it open, from either side of your truck. This saves you that unnecessary lap around the truck, no more walking around.

The cover is secured with 10 locking clips, and they hold up nicely. If you’re looking for an upgrade, you can switch them out for aluminum clips, for that added sturdiness and assurance.

Now, for how it looks? You’ve got choices, “Black Diamond Mist”, the regular “Black Urethane Black”, and the fancy “Carbon Fiber” option. If you’re feeling a bit extra and want your truck to look robust, maybe spend on the carbon fiber.

Carbon fiber is pretty popular in the auto industry these days. It enhances the durability of the cover. Underneath the coating are the solid aluminum sheets.

BAKFlip MX4 Tonneau Cover
BAKFlip MX4 Tonneau Cover

A carpet lining on the inside will make your rides smoother and quieter. Not only would it protect the cover from the inside, but it would also reduce noise, offering a quieter drive.

LOMAX Stance also features four rubber feet on the inner side of each panel to avoid clacking sounds while driving.

Wanna know more about LOMAX Stance Tonneau Cover? Read about it in detail.

On the other hand, the BAKFlip MX4 also features, a folding with three or four panels, that easily flips towards your truck’s cab.

Its sleek design is not just about looks – it might even save you some gas. And that matte finish? Keeps things looking slick without the annoying glare.

Strength-wise, this thing is solid. It is made from tough aluminum panels, it can handle the daily grind, and some unexpected weather twists.

BAKFlip even says it can hold up to 400 lbs if it’s spread out evenly. And those black rubber seals make sure your stuff stays dry, whatever the weather it is.

Know more insights about BAKFlip MX4 here. Read the detailed article.


Installation Guide, BAKFlip MX4 Hard Tonneau Cover
BAKFlip MX4 Installation

The BAKFlip MX4 and the LOMAX Stance, both being hard folding tonneau covers, have the same installation process. Installation is pretty simple, you do not need to hire anybody to install it.

Alright, let’s keep it straight.

  • Pop open the box and lay out all the parts. Double-check with the manual.
  • Place those side rails onto your truck bed – think of them as the foundation.
  • Place the cover on the rails. Ensure it sits right.
  • Use the provided clamps to fix and lock that cover down.
  • Tinker with the pull cables a bit. They help you fold the cover. Give it a few tries to see how it flows.
  • The only tricky bit is the weight of the covers. You may need a partner for a hand.
  • And if you’re still in doubt, watch a YouTube tutorial.

While both the covers have similar installation processes at their core, always refer to the specific manual that comes with each product.

Impact of Weather

Let’s talk about which one stands out here.

Water Resistance

The BAKFlip MX4 is pretty solid when it comes to handling the usual rain showers. The main line of defense here is its weatherstripping and seals, doing a commendable job in keeping a majority of the water out.

But if you experience a heavy storm, expect a few droplets to make their way inside.

You must be thinking do all tonneau covers leak? Read our dedicated post here https://toptonneaureview.com/do-all-tonneau-covers-leak/

Switching gears to the LOMAX Stance, it’s decent with light rain situations. The cover does its bit, but in heavier storms, there’s a slight chance of moisture sneaking in, especially around those tricky corners.

So, if you’re in an area with frequent downpours, it’s something to keep in mind.

Sand and Dust Protection

The BAKFlip MX4 comes with seals that are pretty good at keeping out everyday dust. If you’re dealing with average dusty roads, this one’s got your back. I never experienced a sandstorm when I had it installed on my truck, but keeping in mind its seals and strippings it should do a great job here too.

On the other hand, the LOMAX Stance does an admirable job when faced with sandstorms. It’s not bulletproof against sand, but it holds its ground pretty well. However, if things get super wild, a bit of sand might creep in.

UV Protection & Durability

The BAKFlip MX4 features a matte finish, that looks sharp and offers protection against those harsh UV rays. This means even under constant sunlight, it won’t lose its color and charm.

Side Note – The top of BAKFlip MX4 can get scratched up if you’re rough with it.

Meanwhile, the LOMAX Stance is built to withstand the sun and keep looking good while doing it. Its range of finishes, like the Black Urethane and Carbon Fiber, not only look slick and robust but also provide an extra layer of defense against the elements.

Cold & Snow Performance

The BAKFlip MX4 isn’t specifically designed for extreme cold or heavy snow conditions. I haven’t personally tested it in the North, but with its build, it should be okay with standard snow.

LOMAX Stance, meanwhile, is designed to manage various extreme conditions, including cold and snow. But when faced with heavy or wet snow, its effectiveness may drop a notch.

Depending on your region and its weather patterns, this info can help you make a choice that fits best.

Overall, neither the BAKFlip MX4 nor the LOMAX Stance is perfect for every weather situation. They both hold up well against typical conditions, but they have their limits.

Easy Operation Ride Comfort

Using the BAKFlip MX4 tonneau cover is pretty straightforward. Pull the recessed cable pulls at the back rail, and you can fold the panels towards the cab for easy truck bed access. Props help secure the panels, simplifying cargo handling.

When it comes to driving, the low-profile design enhances your truck’s aerodynamics, potentially boosting fuel efficiency. Plus, its durable build ensures it remains stable, eliminating flapping noises, even during high-speed or off-road drives.

You can even drive with it partially open for added flexibility. And if you ever want to remove it? No hassle, and no marks left behind.

Now let’s discuss the LOMAX Stance Tonneau Cover and its impact on your trucking experience.

The LOMAX Stance Cover protects your cargo effectively. It keeps your belongings safe from external threats and the elements, so you can drive confidently.

This cover also improves your truck’s aerodynamics. Its low-profile design reduces wind resistance, which can lead to smoother rides and potential fuel savings.

Still can’t decide which tonneau cover is best for you? Check out our top pick on hard tri-fold covers.

Operating the cover is straightforward. If you need to access your cargo, you can open the cover smoothly with its handle. The cover’s Rigidlink locking system lets you open it at 90° when needed. The rubber feet under each panel and bungee cords ensure a noise-free ride.

For maintenance, the LOMAX Stance requires minimal effort. Occasional cleaning maintains its appearance and functionality. Regular care ensures its longevity and performance.

Both the BAKFlip MX4 and LOMAX Stance have similar operational methods. Nonetheless, the distinct features of the LOMAX Stance, such as its Rigidlink locking mechanism, rubber feet, 10-point securing system, and varied finish options, give it an edge.

A Word on Security

Speaking of security both BAKFlip MX4 and LOMAX Stance are hard covers. Hardcovers are considered the safest ones because they cannot be unlocked without opening the tailgate.

Also, this design adds security because the aluminum panels are robust and impenetrable. It’s a strong cover that protects your cargo well.

But, even though it’s tough, you should know nothing is 100% secure, so it might not stop the potential thieves. It’s always a good idea to keep valuable things hidden and park in safe places.

Is It Worth The Money?

The LOMAX Stance has a price tag that floats between $1,082 – $1,325. Now, that’s a decent chunk of change. It comes with a 3-year warranty, which is alright. But if you spread that cost over those three years, you’re looking at roughly $441.67 annually on the higher end.

Switch gears to the BAKFlip MX4. It’s priced a bit higher, running between $1,199.99 – $1,249. Here’s the kicker though, it offers a 5-year warranty. Doing some quick math, that’s about $249.80 each year, considering the pricier side of things.

While both these covers bring their own charm to the table, from a purely cost and warranty standpoint, the BAKFlip MX4 seems like the better deal.

But if we look at what LOMAX Stance offers that’s unbeatable. It is a unique tonneau cover that brings out a lot to the table. I would say the price is totally justifiable.

Final thoughts

Wrapping things up! The BAKFlip MX4 is super popular and a top pick for many. LOMAX Stance has got its own cool features that make it stand out.

If you prefer unique things like I do and are comfortable with all the features LOMAX Stance has, then you must go for it.

At the end of the day, it’s all about what you want. I’ve got a bit of a crush on the LOMAX Stance, but the BAKFlip MX4 is awesome too. It’s BAK’s all-time best-seller for a reason.